In addition, the following services failed to start "Computer browser service", "Net logon Service", "Workstation Service", and "Messenger Service". Starting test: systemlog An Error Event occured. c. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. http://as3soft.com/windows-cannot/windows-cannot-access-the-specified-device-path-or-file-windows-7-my-computer.html
Text Quote Post |Replace Attachment Add link Text to display: Where should this link go? as Hyper-V-Host (no problems) WS2008 TS at site 1 (no problems) WS 2003 Std DC at site 2 (problem occured at 10.08.2011, was rebootet at 11.08.2011, problem occured at 24.08.2011, was Microsoft Student Partner 2010 / 2011 Microsoft Certified Professional Microsoft Certified Systems Administrator: Security Microsoft Certified Systems Engineer: Security Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration Microsoft Certified Help Desk » Inventory » Monitor » Community » Home Windows cannot determine the user or computer name. (The system detected a possi by JRCIS on Sep 21, 2011 at 12:48 http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1053&EvtSrc=Userenv&LCID=1033
Well what's going on is that we have media server that's not allowing users to Authenticate using LDAP and as part of the error messages that we are getting that's one of by Dumphrey · 10 years ago In reply to Maybe . 0Votes Share Flag Collapse - have you by Dumphrey · 10 years ago In reply to Group Policy Windows Serv Is DNS on a domain controller or a dsl/router? Yes it's an AD-integrated DNS-Server. 4.
I resumed it and suddenly netdiag and dcdiag completed successfully again. Please dig into Process Explorer, if there is any thread that take too much resources. Like Show 0 Likes (0) Actions 4. Event Id 1053 Error Code 1722 Have you correct suffix in the domain controllers? 2.
See WITP76098 for information on how to troubleshoot kernel-mode memory leaks. In situations like this (small number of DCs), I preferto change the DNS from AD-I to dynamic primary/secondaryso that you can see what you're doing and, if necessary,hand-repair the zones. Comments are closed. https://community.spiceworks.com/topic/38164-error-1053-windows-cannot-determine-the-user-or-computer-name We opened the firewall to allow client authentication and the problem was solved.
Control Panel>System>Computer Name>Change. Event Id 1053 Group Policy Like Show 0 Likes (0) Actions Go to original post Actions Remove from profile Feature on your profile More Like This Retrieving data ... Next, the "Wait for network..." GPO has helped. Are all these devices physically behind the same firewall? 0 Poblano OP JRCIS Sep 22, 2011 at 10:37 UTC mike726 wrote: Johny, I would be looking for duplicate
The port listening in http:#22588980is missing 88/UDP 53/UDP 123/UDP. http://www.chicagotech.net/Q&A/ad07.htm After rebooting an affected server everything works fine again for about 10 days. (with no GPO-Errors). Windows Cannot Determine The User Or Computer Name 1053 or rsop? http://tinyurl.com/3tqtz8a sorry had to do it... Windows Cannot Determine The User Or Computer Name 1326 But, this error continues and I cannot get group policy to work on any servers in the DMZ.
This configuration works since about 5 years. http://as3soft.com/windows-cannot/windows-cannot-access-the-file-gpt-ini-for-gpo-1058.html That should restore the subdomains.Then delete the subdomains and stop/start netlogon onthe other DCs. Event ID:1053 - "Windows cannot determine the user or computer name. (The specified domain either does not exist or could not be contacted.) Group Policy processing aborted.Physical servers and computers do x 120 Rich Ailes I had this error crop up with a companion error in the system log: The Security System detected an authentication error for the server cifs/FQDNservername. Windows Cannot Determine The User Or Computer Name Access Is Denied
Johny, Are you getting this while logging on do a domain PC? if you had two domains with the same name,you might think about going into your WINS serversand tombstoning any duplicate records. 5. x 5 Anonymous In our case, an apparently corrupt OU caused the servers in it to create the event ID 1000 (Userenv) with message: "Windows cannot determine the user or computer weblink Friday, September 02, 2011 2:21 PM Reply | Quote 0 Sign in to vote Issue was resolved.
I will let you know in the morning if this is a go - thank you :-) 0 Pure Capsaicin OP Martin9700 May 18, 2009 at 4:12 UTC Windows Cannot Determine The User Or Computer Name The Rpc Server Is Unavailable Are all the vlan interfaces set up correctly as far as routing if required and vlan tagging to allow traffic? When I put the server's switch port into portfast mode on my Cisco 6500 series switch, the issue was resolved".
I've read elsewhere that uninstalling the Shared Folders feature in VMware Tools can accomplish the same result, but have not personally tested it yet. Simply a domain member! #4 WS2003 Std (updates @ 29.07, no problems) #5 WS2003 Ent x64 2ndDC (updates @ 29.07, problems @ 9.8, 18.8, rebootet @ 19.08, 29.08) #6 WS2003 Ent After trying other solutions, I was able to resolve the issue by removing the ''Client For Microsoft Networks'', rebooting, then adding the client back in, and rebooting again. Event Id 1053 Activesync When I put the server's switch port into portfast mode on my Cisco 6500 series switch, the issue was resolved".
The solution ultimately came from all three articles. x 4 Pavel Dzemyantsau - Error: "Not enough storage is available to complete this operation" - In my case, this error was caused by Backup Exec 10 agent memory leaks. yes, after a reboot there are no more errors or lines with failed. 5. check over here Login here!
with no effect. Should I try to restart a service or unplug the network cable on the affected server? I think that you have not DNS working properly. x 4 EventID.Net From the newsgroup microsoft.public.windowsxp.basics, for the error "Not enough storage is available to complete this operation": "As per ME263693, you need to either install the hotfix or the
We had the following group policy enabled in the Security settings "Audit: Shut down system immediately if unable to log security alerts". Im sorry, but 0x457 is hexadecimal. The Local Admin account had been disabled. I have touched the case of memory leak and ask in there is change in memory usage.
Was there a patch or did you have to change the application? Network 1: (1 site, SBS 2003 (installed KB2507938, KB2555917 at 31.07.2011, no problems) WS2008 WS2003 (installed KB2507938, KB2555917 at 22.08.2011 problem occured at 30.08.2011) Network 2: (3 sites, 5 DCs) (installed Server 2003 / 2008 32/64bit (basics) Server part of the domain or just participating? All affected servers are in the same subnet and connected with a layer-2-switch.